Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Modelo: IG7
Marca: Brando
Paquete: Bolsa de plástico, caja, cartón, palet
productividad: 25000 pcs per month
transporte: Ocean,Land,Air
Lugar de origen: China Ningbo
Apoyo sobre: 5000 pcs per week
Certificados : CE
Hafen: Ningbo,Guangzhou,Yiwu
Tipo de Pago: L/C,T/T,Paypal,Money Gram,Western Union
Incoterm: FOB,CFR,CIF,EXW
4Cyl IG7 Dakota Navajo Inyector Rail LPG CNG
Las características de 2 Ohm 4 Cylinder IG7 Dakota RAIL Type Rail Injector son las siguientes:
1. Inyector de riel para GLP gaseoso y gas natural.
2. Versión única con carrera de 0,47 mm.
3. Bobinas con conector hermético incorporado de 2 vías, compatible con amplificador.
4. Cuerpo en aluminio.
5. Tecnología de construcción adecuada para alcanzar un alto rendimiento en términos de velocidad y duración.
6. No muy sensible a la acumulación de suciedad.
7. Alta estabilidad de flujo interno y repetitividad .
Dimensión total de 2 Ohm 4 Cylinder IG7 Dakota Navajo Rail Inyector:
Parámetros técnicos del riel inyector tipo IG7 DAKOTA Lpg / Cng:
Characteristic | Unit | Value | Note |
Injector Version | N° of cylinders | 2, 3, 4 |
|
Material body and treatment |
|
Aluminum | |
Relative Pressure | Bar (Psi) | From 0.5 to 2.0 (7 to 29) | Working pressure |
4.5 (65) | Max pressure | ||
Rated voltage (at coil) | Volt | 10.8 - 14.4 |
|
Coil type | by encoding | E2 |
|
Resistance | Q | 2 | ± 5% at T= 25° |
Suggested peak current time (duration) | ms | 2.4 |
|
Suggested holding current (±10%) | A | 1.4 |
|
Cold Starting Requirements |
|
Increase up to 20% the "peak current time" for first cycles when gas temperature is < 10°C | |
Complete OPENING Response Time | ms | 1.7 | (±10% - total injection time 5 ms) ± 5% tested without nozzle at 14V Dp=1bar T= 25°C |
Complete CLOSING Response Time | ms | 1.4 |
|
Minimum injection pulse | ms | 1.8 | tested with 2 mm nozzle diameter at 14V Ap=1 bar T= 25°C |
Stroke | Micron | 470 |
|
Seat Diameter | mm | 3.3 |
|
Static flow rate (with max nozzle O) for 1 single injector at 20°C (with air) | SLPM (sL/min) | 115 | at 1 bar inlet pressure |
170 | at 2 bar inlet pressure | ||
Leakage (tested with air) | cc/h | < 15 |
|
Noise level | dB | T.B.D | ±1 dB Rail Test Condition |
Compatibility with gas |
|
LPG, CNG |
|
Driver Stage |
|
Peak and Hold (PWM) |
|
Coil Connector type |
|
2 way Amp super seal fermale connector with tab contacts | About connecting wire, refer to our drawing, code 114.01.AMP.001 |
Inlet gas fitting for rubber hose | mm | φ10 mm, φ12 mm, φ14 mm, φ16 mm | |
Outlet gas fitting |
|
Calibrated nozzles M8x1 for rubber hose φ4 mm - φ5 mm - φ6 mm | |
Calibrated hole φ range (for nozzles) | φ | From 1.00 to 3.25 mm (0.25 mm step) |
|
Approvals |
|
110R-00 67R-01 (-40°C to +120°C) |
|
Principle of operation |
|
Solenoid valve, Normally closed, Mobile Plunger | |
Power handling capability LPG | HP/cyl | 1 bar up to 40 HP/cyl | |
Power handling capability CNG | HP/cyl | 2 bar up to 35 HP/cyl | |
Coil IP Rating |
|
IP54 |
|
Presentación de embalaje del inyector de riel Dakota del cilindro tipo 2 Ohm 4 IG7:
Instrucciones de uso:
1. Se recomienda instalar un filtro en el extremo frontal de la tubería de inyección del riel de rociado para que pase efectivamente las impurezas en la fuga de aire.
Evite la entrada de impurezas y partículas finas en el riel y reemplace el filtro durante tres meses o 20,000 kilómetros.
2. Para garantizar el mejor uso, se recomienda instalar el riel lo más lejos posible en ángulo vertical.
3. Según los diferentes modelos del riel de rociado, es necesario seleccionar el tipo de riel de rociado correspondiente en la configuración del control eléctrico.
4. Según la potencia del motor, debe elegir el diámetro de boquilla adecuado.
Concéntrese en sus demandas, le ofrecemos la mejor solución:
√ Contáctanos si tienes dudas sobre algunos puntos
√ Contáctenos si necesita cambiar
√ Contáctenos si no es el que está buscando
√ Contáctanos si estás diseñando
Bienvenido a cualquier pregunta o consulta!
PRODUCTOS POR GRUPO : Carril del inyector de GLP CNG
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.